Skip to content

Diagnostics Cable

The USB cable, USB-A to Micro-USB-B, 1.6 m (part number 136000138) is intended for debugging and for diagnosis of the device.

USB cable, USB-A to Micro-USB-B, 1.6 m
Figure 1: USB cable, USB-A to Micro-USB-B, 1.6 m

Only USB 2.0 Full Speed (12 Mbit/s) is supported.

It has a USB-A, male connector on one end and a Micro-USB-B, male connector on the other.

Connectors

  • USB-A connector, male
  • Micro-USB-B connector, male
USB-A Pin Micro-USB-B Pin Signal Description
1 1 VBUS +5 V bus voltage (device is self-powered; not used to supply power)
2 2 D- Data- (bidirectional)
3 3 D+ Data+ (bidirectional)
- 4 - Not connected
4 5 GND Ground