Starter cable

Starter Cable

The cable CLW4K Starter Cable 6open 2dsub 1pw 2m (part number 136000197) is equipped with the following connectors and open individual wires:

• 1 micro timer II socket,14-pin, female
• 2 D-sub, 9-pin, female (CAN1 and CAN2)
• 1 power connector

Starter cable: Individual wires

The open-end connectors are numbered on the strand ends.
The polarity also applies for the following cable:

• CLW4K starter cable 6 open, 2 D-Sub, 1 pw, 2 m (part number 136000197)

Figure 1: Individual wires open

Designation	Color	Description
Terminal 31 / ground	Green	Power supply
Analog input 1	Yellow	I/O input
Analog input 2	Gray	I/O input
Not used	―	―
Digital output	Blue	I/O output
Terminal 15	Red	Input (ignition signal)

Starter cable: Power supply cable

Figure 2: Power connector, low voltage coupling

Pin	Designation	Color	Description
1	Terminal 31 / ground	Green	Power supply
2	Terminal 30 / VCC	White	Power supply

Starter cable: D-Sub connector (CAN1)

Figure 3: D-sub connector (CAN1)

Pin	Designation	Color	Description
1	not assigned	-	-
2	CAN1-Low	Brown-green	CAN, bidirectional
4	not assigned	-	-
5	not assigned	-	-
6	Terminal 31 / ground	Green	-
7	CAN1-High	White-green	CAN, bidirectional
8	not assigned	-	-
9	Terminal 30 / VCC	White	Power supply

The D-Sub connector (CAN1) connection is also equipped with a slide switch to complete a reset to the factory settings.

Note

For more information on how to perform a device reset, see Reset device (repair mode).

Starter cable: D-Sub connector (CAN2)

Figure 4: D-Sub connector (CAN2)

Pin	Designation	Color	Description
1	not assigned	-	-
2	CAN2-Low	Red-blue	CAN, bidirectional
3	not assigned	-	-
4	not assigned	-	-
5	not assigned	-	-
6	Terminal 31 / ground	Violet	-
7	CAN2-High	Gray-pink	CAN, bidirectional
8	not assigned	-	-
9	not assigned	-	-