Launch Kit¶
For the initial setup of the device, an additional launch kit (part number 253000187) with the following components is available for ordering:
| Material | Qty |
|---|---|
CLW4K Starter Cable 6open 2dsub 1pw 2m136000197 |
1 |
Cable MTII 14pin code1 open 2m136000198 |
1 |
| ANT WLDB DA 2M0 FAKRA-I FA (Antenna) |
1 |
| PCAN-USB - CAN/USB Interface | 1 |
| CAN bus terminator D-Sub/D-Sub, 120Ω | 1 |
| Power supply unit | 1 |
| Mounting kit M6 Enclosure GH0806 | 1 |
| CANlink Connector Kit | 1 |
The launch kit contains all components and accessories that are needed for the initial configuration, mounting and operation of a CANlink® wireless 4000 device.
It allows the examination of different mounting and connection options.
Use Cases¶
Depending on the use case (number of devices used) and the device types (internal/external antenna), you may need more than one launch kit for an initial setup.
The use cases can be: setting up a bridge between two pieces of equipment or setting up a wireless connection for analysis.
Minimum requirements
For every device you must have at the least the connector.
For the 4003 type of the CANlink® wireless 4000, you additionally need the antenna. Both components are included in the launch kit.
A launch kit contains 3 types of cables for the main plug connector:
-
Starter Cable / Main Plug Connector:
Complete cable including the main plug connector and other connectors.
Ideal for testing on the desk. -
Starter cable for main plug connector, Individual wires open:
Cable including the main plug connector and open wires to be connected to the machine's cable harness.
Ideal for testing on the machine.
Proemion offers the Connector Kit containing the main plug connector and contacts in order to build a custom cable.
If you want to connect the devices to a machine, you either need several connectors with open wires or the Connector Kit for custom mounting.