Power management note

Note

Device defect due to power failure. Destroyed hardware component on the device. Repair not possible.
Destroyed file system on the device. Repair by Proemion necessary.

• Permanently connect terminal 30 to steady power supply (vehicle battery) to ensure that the required power management settings can be applied to the device in the right manner.
• Permanent disconnection from the power supply is only permitted when the device was set to sleep mode before.
• Connect terminal 15 correctly and configure secure switching to sleep mode in the Power Management section of the device configuration.
• Do not disconnect the device from the power supply until it has completely switched to sleep mode (all LEDs off).