Software and Accessories¶
Additional software can be downloaded from our Download Center.
| Material | Part Number |
|---|---|
| PCAN-USB - CAN/USB Interface CAN-PC communication gateway for configuration and test purpose | 257001041 |
| CANlink Connector Kit MT II 14-pin socket housing, 14x MT II contact type A, 14x MT II gray single-wire sealing, 14x dummy plugs only for machine processing, refer to Connector Kit Datasheet for further information | 132600031 |
| ERGOCRIMP HAND TOOL 539635-1 without die set Hand Tool Direct order at supplier | |
| ERGOCRIMP DIE SET for MICRO Timer and Micro Timer (SWS) 539663-2 Micro Timer Direct order at supplier | |
| MT2 A REC 1.6 Contact SWS Sn (LP) for crimping with hand tool Crimping Hand Tool Direct order at supplier | |
| CAN bus termination, D-Sub/D-Sub CAN 120 Ohm | 157000033 |
| MT II socket, 14-pin, cod.1, open, 30 cm Connection cable for main plug connector, 14-pin with open cable, 0.3m | 136000188 |
| MT II socket, 14-pin, cod.1, open, 2 m Connection cable for main plug connector, 14-pin with open cable ends, 2 m | 136000198 |
| CLM3600/10K Startercable 6open 3dsub 1pw 2m (Starter cable for main plug connector) Cable for initial startup with complete connector assignment for main plug connector, 14-pin, ready-to-use, 2 m long | 136000202 |
| Cable, M12 4-pin (D) CAT6 - RJ45, 2m Ethernet cable | 136000207 |
| ANT LTE GNSS DA 3M0 FAKRA-D FAKRA-C FA (Shark fin) GNSS / mobile radio antenna | 157000109 |
| ANT LTE GNSS DA 3M0 FAKRA-D FAKRA-C FAR (Flat Rectangle) GNSS / mobile radio antenna | 157000121 |
| ANT GNSS DB DA 3M0 FAKRA-C FA1 GNSS Dualband antenna 1available on request |
157000131 |
| Mounting kit M5 Enclosure GH1208 fixing set | 141000017 |
| Power supply unit, US EU UK AU 24V/0.83A/20W Power supply unit without AC plug 24 V 0,83 A 20 W, plug adapter set (US, EU, UK, AU), adapter DC 5.5x2 mm BU / 3.5x1.35 mm ST | 257004007 |
| CODESYS Control Basic M (License Key)1 | 157 002 066 |
| CANlink® mobile Opening Tool for GH1209 housings (see CANlink mobile Opening Tool manual) | 157012001 |
-
Read in CODESYS Control Basic M bundle what is included in the CODESYS license. Note that this license will only include up to 2 CANopen/Profibus/Modbus/J1939 instances.
Each interface, like for instance each CAN channel, needs a dedicated instance.
If you need more instances, you would need to upgrade your license. For example, J1939 messages in the 3 CAN channels. ↩