Configure the device

After connecting the CANlink® mobile 3600 to your PC, configure the device using the Proemion Configurator.
This chapter describes the basic steps required for the initial configuration.

For detailed information about creating and installing a device configuration, see Customizing demo configuration and Configuration update.

Open the Proemion Configurator

1. Start the Proemion Configurator on your PC.
2. Connect to the CANlink® mobile 3600.
3. Verify that the device is detected and displayed in the software.

Upload a configuration

To enable signal processing and data transmission, install a device configuration using the Proemion Configurator.

1. Download the demo configuration file named clm36xx_Proemion_DemoConfig.DOD.
2. Open it in the Proemion Configurator.
3. Install the configuration on the device.