CANlink® mobile 3700 Datasheet

Introduction¶

In the following, you find the technical specifications for the CANlink® mobile 3700 series.

Figure 1: CANlink® mobile 3700 (Type 3771)

All assembly drawings can be found in the Annex.

Datasheet¶

The CANlink® mobile 3700 is the successor of the CANlink® mobile 3600 device family, offering optimized connectivity with 4G LTE Cat 1bis and Wi‑Fi 6 along with a more powerful processing platform and greater memory capacity.

The device is designed for industrial and off-highway applications and maintains mechanical mounting compatibility with the CANlink® mobile 3600 and CANlink® mobile 10000 device families.

Type Overview¶

All Types in the table are Standard Variants.

Type	Part Number	Battery	Antenna	Ethernet
3733 3737	253004822 253004813	- ✓	Integrated Integrated	- -
3773 3777	253004823 253004814	- ✓	External¹ External¹	- -
3731	253004820	-	Integrated	✓
3771	253004821	-	External¹	✓

Note: Customer Specific Variant (Type 3721, Part Number 253004400, Housing Type MT14) is also available. The features External Antenna, Battery, Ethernet (SPE), LIN, 1-Wire, Digital Output and CAN3 are not available.

All Standard Types support¶

Digital Output
LIN
1-Wire
CAN1, CAN2 and CAN3
4G LTE Cat 1bis with global band support
Wi-Fi 6 dual band
Bluetooth Low Energy (BLE) v5.1
GNSS: GPS / Galileo / BeiDou / Glonass / QZSS concurrent reception
2x analog input (0–15 VDC)
1x Terminal 15 input
3-axis acceleration
3-axis gyroscope
Trusted Platform Module (TPM)
Real-time clock

Technical Specifications¶

Mechanical¶

Parameter	Value
Housing	GH1209
Dimensions (L/W/H)	≤ 123 / ≤ 87.5 / ≤ 37.5 mm
Mounting	2x M5 mounting holes
Protection class	IP6K7
Material	PA66
Color	Black
Weight	< 220 g

Electrical¶

Parameter	Value
Supply voltage Terminal 30	6 – 36 VDC
Reverse polarity protection	-36VDC
Overvoltage protection	+36VDC
Operating current average @24 VDC	< 200 mA
Peak current @24 VDC	1A
Sleep current @24 VDC	< 500 µA
Battery type	Lithium-polymer
Battery capacity	7.4 Wh
Battery charging current (internal Vbat)	< 500 mA
Status indicators	2x RGB LEDs
Power modes	Normal, battery, sleep

I/O characteristics¶

Parameter	Value
Main connector	Micro Timer II, 14 contacts
Analog inputs	2x (0–15 VDC, 12-bit resolution)
Terminal 15 input	Yes
Digital output	1x (6–36 VDC / 500 mA)

Processor and memory¶

Parameter	Value
Microcontroller (MCU)	STM32H7
CPU frequency	≤ 400MHz
RAM	9 MB
Flash	130 MB
NV-RAM	64 KB

Sensors¶

Parameter	Specification
Temperature (not calibrated)	-40 to +85 °C
Acceleration (not calibrated)	3 axes, ±16 g, 16-bit
Gyroscope (angular rate sensor, not calibrated)	3 axes, ±250 °/s, 16-bit

Cellular connectivity¶

Parameter	Value
Technology	4G LTE Cat 1bis
LTE bands	B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B34, B38, B39, B40, B41, B66
Max theoretical downlink	10 Mbit/s
Max theoretical uplink	5 Mbit/s
Max transmit power	+23 dBm
Receiver sensitivity	-98 dBm
SIM	Embedded MFF2 Proemion SIM and nano-SIM slot
Antenna	Single, integrated or external Quad HFM connector (Z-code)

Wi-Fi¶

Feature	Specification
Standard	802.11 ax/a/b/g/n
Transmit/receive mode	1x1 SISO (single transmit/receive antenna)
Channel bandwidth	≤ 20MHz
Frequency bands	2.4 GHz / 5 GHz
Max PHY data rate	up to 96 Mbit/s
Max transmit power	2.4 GHz: +18.5 dBm / 5 GHz: +18 dBm
Receiver sensitivity	≥ -94 dBm @ 2.4 GHz / ≥ -86 dBm @ 5 GHz
Security	WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Modes	Station, SoftAP
Antenna	Single, integrated or external Quad HFM connector, Z-code (combined with Bluetooth)

Bluetooth¶

Feature	Specification
Bluetooth Low Energy (BLE)	Version 5.1
Classic Bluetooth	Not supported
Frequency band	2.4 GHz
Max PHY data rate	1 Mbit/s (LE 1M PHY)
Max transmit power	+0.8 dBm
Receiver sensitivity	-89 dBm
Mode	Gateway mode, CA-CAN-BLE bridge mode
Antenna	Integrated or external Quad HFM connector, Z-code (combined with Wi-Fi)

GNSS/Positioning¶

Feature	Specification
Satellite systems	GPS / Galileo / Beidou / Glonass / QZSS concurrent reception
Position accuracy	≤ 2.5 m (CEP 50%, 24 h static, -130 dBm, >6 satellites in view)
Update rate	1 Hz
Cold start	< 60 s
Warm start	< 10 s
Hot start	< 5s
Receiver sensitivity GPS	cold start -148 dBm, tracking -165 dBm
Antenna	Integrated or external Quad HFM connector (Z-code) for active antenna

CAN interfaces¶

Feature	Specification
CAN1, CAN2, CAN3 interfaces	CAN (2.0 A/B): ISO 11898-2
Max PHY data rate	1 Mbit/s
CAN protocols	CANopen, Layer 2, J1939
Custom protocols	On request
Wake-up capability	CAN1 and CAN3

Other interfaces¶

Feature	Specification
LIN	v2.2A, physical layer ISO 17987-4, commander mode, 20 kbit/s
1-Wire	Asynchronous serial, half-duplex, commander mode, 3.3V level, no supply for responder
Single Pair Ethernet (SPE)	IEEE 802.3bw 100BASE-T1, max. PHY data rate 100 Mbit/s
SPE connector	H-MTD connector (Z-code)
Wake-up capability (SPE)	TC10

Note

Single Pair Ethernet (SPE) hardware is available but currently not supported by the firmware.

Security¶

Feature	Supported
Trusted Platform Module	Yes
Secure firmware update	Yes
Encrypted data transmission according to TLS	Yes
Bidirectional authentication

Environmental¶

Parameter	Specification
Operating temperature (Types without battery)	-40 to +80 °C
Operating temperature (battery discharge)	-20 to +50 °C
Operating temperature (battery charge)	0 to +35 °C
Humidity	< 90%
Vibration	10 g
Shock	30 g
Service life	≥ 10 years

via Quad HFM connector (Z-code) ↩↩↩

Accessories¶

The following accessories are compatible with CANlink® mobile 3700:

Description	Part number
CANlink® mobile 3700 Launch Kit	253000191
CANlink® Connector kit	132600031
External antenna, LTE/GNSS/Wi-Fi, 3 m cable, HFM-Quad connector	157000136
Main connector cable, 14-pin (Micro Timer II, COD.1), open wire ends, 30 cm	136000188
Main connector cable, 14-pin (Micro Timer II, COD.1), open wire ends, 2 m	136000198
Mounting kit, M5, housing GH120x	141000017
Single-pair Ethernet cable, 2 m (H-MTD to H-MTD)	136000245
Starter cable, 6 open leads, 2 D-Sub connectors, 1 power connector, 2 m	136000246
USB cable, 2 m (USB-C to USB-C)	136000244

Certifications¶

The CANlink® mobile 3700 is designed to comply with the following regulatory requirements:

Certification / Approval	Status
CE (EU)	Pending
FCC (USA)	Pending
ECE R10 (E1)	Pending
ISED (Canada)	Pending
ACMA (Australia / NZ)	Pending
GITEKI (Japan)	Pending
KC (Republic of Korea)	Pending
RoHS	Pending
REACH	Pending
WEEE	Pending

Service and Support¶

The latest versions of the drivers, software, firmware, and documentation are available at Document Library.

Do you need help or want to report a bug?
Visit Proemion for more information, or raise a ticket via Support.

Firmware Updates and Support¶

To ensure the best performance and security of your devices, we strongly recommend always installing the latest firmware provided by Proemion.

Please note:

We do not provide technical support for issues caused by outdated firmware.
Errors resulting from outdated firmware are considered non-qualified errors and are not covered by warranty or support.

Regular firmware updates are essential to maintaining the functionality of your devices.
If you need assistance with the update process, please contact our Service and Support.

For more information on the Firmware Update, check the device manual of your device at the Document Library.

Annex - Assembly Drawings¶

This chapter contains the assembly drawings of the four available housing forms of the CANlink® mobile 3700, including their dimensions, connector interface, and pin assignment.

All Housing Forms (A–D) include a Main Plug Connector for power and CAN bus communication.

Housing Form A – No Additional Connectors

Figure 1: Housing Form A – Main Plug Only

Housing Form B – External Antenna Connector

Housing Form C – Ethernet Connector

Housing Form D – Ethernet and Antenna Connectors

Figure 4: Housing Form D – Ethernet and External Antenna Connectors

PDF files of the assembly drawings are available in the Download Center under:

01_Proemion_Devices > 01_CANlink mobile 3700 > 01_Documentation > Drawings